set cut_paste_input [stack 0]
version 7.0 v10
push $cut_paste_input
Group {
 name HDR_PREPPER
 label "\[value lightname]"
 selected true
 xpos -196
 ypos -304
 addUserKnob {20 light_ctrls l "Light Controls"}
 addUserKnob {26 hdrPrepTag l INVISIBLE +INVISIBLE T "scoping sucks."}
 addUserKnob {2 root_path l "Output Folder" t "Choose the root path of where to output the exr's."}
 root_path /var/tmp
 addUserKnob {22 setAllFolders l "Set all to this folder" t "Set all other HDRPreppers' output folders in this script to the path from this node." -STARTLINE T "n = nuke.thisNode()\nout = n\['root_path'].value()\nallGroupNodes = nuke.allNodes('Group', group = nuke.root())\n\nfor i in allGroupNodes:\n        if i.knob('hdrPrepTag'):\n            i\['root_path'].setValue(out)  \n"}
 addUserKnob {1 lightname l "Light Name" t "Specify a unique name for this light."}
 lightname light1
 addUserKnob {22 setNameForSel l "Set selected to this name" t "All other HDR_PREPPERs that you select in the nodegraph will have the same light name like this one (numbered consecutively)." -STARTLINE T "n = nuke.thisNode()\nwith nuke.root():\n    sel = nuke.selectedNodes()\n\n#increase nummer list by number of HDR Preppers\n    num=\[]\n    for i in sel:\n        if i.knob('hdrPrepTag'):\n            num.append(i)\n\n    num=len(num)\n\n    name = n\['lightname'].getValue()\n    base=name\[:-1]\n    last=name\[-1]\n\n    allGroupNodes = nuke.allNodes('Group', group = nuke.root())\n    \n    if sel == \[]:\n        raise ValueError, 'No Nodes selected. Make sure to select other HDR_PREPPER Nodes.'\n    else:\n        pass\n\n#Set count to end number if there is one    \n    if last.isdigit() == True:\n        count = int(last)\n    else:\n        count = 1\n\n#Set count one number higher than original name if its not included in the selection\n    if not n in sel:\n        count = count + 1\n\n#Set last number to \"1\" on this node if it doesnt have a number at the end\n\n    if last.isdigit() == False:\n        n\['lightname'].setValue(name + str(1)) \n    else:\n        pass\n\n    while (count < num+1):    \n        for i in allGroupNodes:\n            if i in sel:\n                if i.knob('hdrPrepTag'):\n                    if last.isdigit() == False:\n                        newname=name + str(count)\n                    else:\n                        newname=base + str(count) \n                    i\['lightname'].setValue(newname) \n                    count = count + 1\n"}
 addUserKnob {41 Render -STARTLINE T Write1.Render}
 addUserKnob {20 EnvHDRGrp l "Env HDR Output" n 1}
 EnvHDRGrp 0
 addUserKnob {1 hdrname l "HDR Name" t "Specify a name for the environment HDR."}
 hdrname env
 addUserKnob {6 KeepInputFormat l "Keep Input Format" t "If checked the output will have the same format like the incoming format." +STARTLINE}
 addUserKnob {4 setFormat l "| Format" -STARTLINE M {256x128 512x256 1024x512 2048x1024 4096x2048 8192x4096 custom "" "" ""}}
 setFormat 1024x512
 addUserKnob {6 envConvolve l "EnvConvolve (c) Michael Garrett" t "Convolve the output. You must have the EnvConvolve gizmo installed, otherwhise it won't work." +STARTLINE}
 addUserKnob {7 exponent l "| exp" t "Set the environment convolution exponent. 1 represents a diffuse surface. Higher values exponentially increase specularity/glossiness." -STARTLINE R 1 100}
 exponent 40
 addUserKnob {22 createOut l "Create Env Output" T "sel = nuke.thisNode()\nformat = sel\['setFormat'].getValue()\n\nwith nuke.root():\n    #create Reformat\n    if sel\['KeepInputFormat'].value() == False:\n        ref=nuke.nodes.Reformat()\n        ref.setInput(0,sel)\n        if format == 0:\n            try:\n                Latlong256\n            except:\n                Latlong256=nuke.addFormat('256 128 1')\n            ref\['format'].setValue(Latlong256)\n            \n        if format == 1:\n            try:\n                Latlong512\n            except:\n                Latlong512=nuke.addFormat('512 256 1')\n            ref\['format'].setValue(Latlong512)\n            \n        if format == 2:\n            try:\n                Latlong1k\n            except:\n                Latlong1k=nuke.addFormat('1024 512 1')\n            ref\['format'].setValue(Latlong1k)\n            \n        if format == 3:\n            try:\n                Latlong2k\n            except:\n                Latlong2k=nuke.addFormat('2048 1024 1')\n            ref\['format'].setValue(Latlong2k)\n            \n        if format == 4:\n            try:\n                Latlong4k\n            except:\n                Latlong4k=nuke.addFormat('4096 2048 1')\n            ref\['format'].setValue(Latlong4k)\n            \n        if format == 5:\n            try:\n                Latlong8k\n            except:\n                Latlong8k=nuke.addFormat('8192 4096 1')\n            ref\['format'].setValue(Latlong8k)\n\n        if format == 6:\n            customRes = nuke.getInput('Custom Resolution:', '128x64')\n            if not 'x' in customRes:\n                raise ValueError, 'Make sure to use a proper format (Width x Height). For example 1024x512'\n\n            else:\n                reslist = customRes.split('x')\n                cRes = str(reslist\[0] + ' ' + reslist\[1] + ' 1')\n                LatlongCustom=nuke.addFormat(cRes)\n            ref\['format'].setValue(LatlongCustom)\n\n    #create EnvConvolve\n    if sel\['envConvolve'].value() == True: \n        conv=nuke.nodes.EnvConvolve()\n        if sel\['KeepInputFormat'].value() == False:\n            conv.setInput(0,ref)\n        else:\n            conv.setInput(0,sel)\n        exp=sel\['exponent'].getValue()\n        conv\['phexp'].setValue(exp)\n        conv\['label'].setValue('exp: \[value phexp]')       \n            \n\n    #create Write Node\n    wr=nuke.nodes.Write()\n    if sel\['KeepInputFormat'].value() == False:\n        if sel\['envConvolve'].value() == False:\n            wr.setInput(0,ref)\n        else:\n            wr.setInput(0,conv)\n    else:\n        if sel\['envConvolve'].value() == False:\n            wr.setInput(0,sel)\n        else:\n            wr.setInput(0,conv)\n\n    wr\['channels'].setValue('rgba')\n    outPath=sel\['root_path'].value()\n    outName=sel\['hdrname'].value()\n    wr\['file'].setValue(outPath + '/' + outName + '.exr')\n    wr\['file_type'].setValue('exr')\n    wr\['datatype'].setValue('32 bit float')\n" +STARTLINE}
 addUserKnob {20 endGroup_2 l endGroup n -1}
 addUserKnob {26 ""}
 addUserKnob {20 lightremoval l "Light Removal Settings" n 1}
 addUserKnob {41 area1 l Area t "Wrap this box tightly around the light source. This will define the output size of the extracted light." T Crop1.box}
 addUserKnob {41 size l "Edge Smudge" t "Control the amount of edge pixels sucked into the light-crop area. Increase this value if holes appear." T Smudge1.size}
 addUserKnob {14 FilterErode1_size l "Edge Extend" t "Extend the edges around the crop area to clean more of the surrounding pixels" R -100 100}
 FilterErode1_size -10
 addUserKnob {7 edge_blur1 l "Edge Blur" t "Blur the edges of the light-crop area." R 0 100}
 edge_blur1 10
 addUserKnob {6 rough_edge1 l "Rough Edge" t "Break up the edges. Best to be used with higher Edge Blur values." +STARTLINE}
 addUserKnob {7 bring_details1 l Details t "Bring back original Details." R 0 100}
 bring_details1 3.5
 addUserKnob {41 detail_blur1 l "Detail Blur" t "Soften the re-introduced Details." T detailBlur1.size}
 addUserKnob {41 useSingleColor l "Fill with constant color" t "Fill in the light area with a solid color." T Switch1.disable}
 addUserKnob {41 singleColor l Color t "The color to fill the light area with if \"Use constant color\" is checked." T Grade2.black}
 addUserKnob {20 endGroup n -1}
 addUserKnob {26 ""}
 addUserKnob {20 addCtrls l "Additional Controls" n 1}
 addUserKnob {6 output_lightmask l "Output Lights Mask" t "Outputs the masks of the lights into the alpha channel." +STARTLINE}
 output_lightmask true
 addUserKnob {0 Shuffle4_disable t "Wheter to apply the edge extensions and blurs to the mask or not." -STARTLINE +INVISIBLE}
 addUserKnob {20 endGroup_1 l endGroup n -1}
}
 BackdropNode {
  inputs 0
  name BackdropNode1
  tile_color 0x565656ff
  label details
  note_font_size 42
  xpos -580
  ypos 1059
  bdwidth 428
  bdheight 279
 }
 Input {
  inputs 0
  name Input1
  xpos -3
  ypos 208
 }
 Dot {
  name Dot39
  xpos 31
  ypos 309
 }
set N7cc55e0 [stack 0]
 Dot {
  name Dot38
  xpos -611
  ypos 309
 }
 Dot {
  name Dot37
  xpos -611
  ypos 2190
 }
 Input {
  inputs 0
  name Mask
  xpos -276
  ypos 692
  number 1
 }
set N7cd1970 [stack 0]
push $N7cc55e0
 Shuffle {
  alpha white
  name Shuffle1
  label "\[value in]"
  xpos -3
  ypos 368
 }
 Dot {
  name Dot7
  xpos 31
  ypos 426
 }
 Dot {
  name Dot3
  xpos 31
  ypos 601
 }
set N7ce6cc0 [stack 0]
 Crop {
  box {250 100 450 300}
  name Crop1
  xpos -123
  ypos 637
 }
 ChannelMerge {
  inputs 2
  operation multiply
  name ChannelMerge2
  xpos -123
  ypos 680
 }
add_layer {lightmaskOrig lightmaskOrig.red lightmaskOrig.green lightmaskOrig.blue lightmaskOrig.alpha}
 Shuffle {
  red alpha
  green alpha
  blue alpha
  out lightmaskOrig
  name Shuffle3
  label "\[value in]"
  xpos -123
  ypos 730
 }
 FilterErode {
  channels rgba
  size {{parent.FilterErode1_size.w} {parent.FilterErode1_size.h}}
  name FilterErode1
  xpos -123
  ypos 772
 }
 Blur {
  channels rgba
  size {{parent.edge_blur1}}
  name Blur1
  label "\[value size]"
  xpos -123
  ypos 811
 }
 Dot {
  name Dot31
  xpos -89
  ypos 882
 }
set N7d21ce0 [stack 0]
 Dot {
  name Dot33
  xpos -159
  ypos 882
 }
set N7d25ef0 [stack 0]
 FilterErode {
  channels rgba
  size -12
  name FilterErode6
  xpos -193
  ypos 924
 }
push $N7d25ef0
 Dot {
  name Dot32
  xpos -255
  ypos 882
 }
set N7d33eb0 [stack 0]
 Shuffle {
  red black
  green black
  blue black
  alpha black
  name Shuffle2
  label "\[value in]"
  xpos -289
  ypos 908
 }
 Noise {
  size 10.5
  gain 0.46
  gamma 0.635
  center {1024 778}
  name Noise1
  xpos -289
  ypos 957
 }
 Dot {
  name Dot4
  xpos -255
  ypos 1018
 }
push $N7d21ce0
 Merge2 {
  inputs 2+1
  operation color-dodge
  name Merge16
  xpos -123
  ypos 1014
  disable {{!parent.rough_edge1}}
 }
 Blur {
  channels rgba
  size 4
  name Blur4
  label "\[value size]"
  xpos -123
  ypos 1061
  disable {{!parent.rough_edge1}}
 }
 Dot {
  name Dot9
  xpos -89
  ypos 1597
 }
set N7d73970 [stack 0]
 Shuffle {
  in lightmaskOrig
  red alpha
  out alpha
  name Shuffle4
  label "\[value in]"
  xpos -123
  ypos 1677
  disable {{!parent.Shuffle4_disable}}
 }
 Dot {
  name Dot45
  xpos -89
  ypos 2017
 }
push $N7d73970
push $N7d33eb0
 Dot {
  name Dot2
  xpos -331
  ypos 882
 }
push $N7ce6cc0
 Dot {
  name Dot1
  xpos -441
  ypos 601
 }
 Colorspace {
  colorspace_out Cineon
  name Colorspace1
  label "\[value colorspace_in] >> \[value colorspace_out]"
  xpos -475
  ypos 1139
 }
set N7d91b80 [stack 0]
push $N7d91b80
 Blur {
  channels rgba
  size {{parent.bring_details1}}
  name details1
  label "\[value size]"
  xpos -570
  ypos 1187
 }
 Merge2 {
  inputs 2
  operation minus
  name Merge1
  xpos -475
  ypos 1233
 }
 Blur {
  channels rgba
  size 4
  name detailBlur1
  label "\[value size]"
  xpos -475
  ypos 1296
 }
 Merge2 {
  inputs 2
  operation mask
  name Merge3
  xpos -365
  ypos 1302
 }
push $N7d21ce0
push $N7ce6cc0
 ChannelMerge {
  inputs 2
  operation stencil
  name ChannelMerge1
  xpos -3
  ypos 866
 }
 Premult {
  name Premult1
  xpos -3
  ypos 1057
 }
 Blur {
  channels rgba
  size {65 65}
  name Smudge1
  label "\[value size]"
  xpos -3
  ypos 1083
 }
 Unpremult {
  name Unpremult1
  xpos -3
  ypos 1121
 }
 Merge2 {
  inputs 2
  operation plus
  name Merge2
  xpos -3
  ypos 1302
 }
 Clamp {
  channels rgba
  maximum 10000
  name Clamp2
  xpos -3
  ypos 1328
 }
push $N7ce6cc0
 Dot {
  name Dot6
  xpos 122
  ypos 601
 }
set N7e10da0 [stack 0]
 Grade {
  black {0 0 0 0}
  multiply 0
  name Grade2
  xpos 88
  ypos 1335
 }
 Switch {
  inputs 2
  which 1
  name Switch1
  label singlecolor
  xpos -3
  ypos 1407
 }
 Shuffle {
  alpha black
  name Shuffle6
  label "\[value in]"
  xpos -3
  ypos 1445
 }
 Dot {
  name Dot5
  xpos 31
  ypos 1541
 }
push $N7cc55e0
 Dot {
  name Dot10
  xpos 213
  ypos 309
 }
 Keymix {
  inputs 3
  channels rgba
  name Keymix1
  xpos 179
  ypos 1593
 }
 Grade {
  name clamp_blacks
  xpos 179
  ypos 1894
 }
 ChannelMerge {
  inputs 2
  name ChannelMerge4
  xpos 179
  ypos 2001
 }
 Clamp {
  channels alpha
  name Clamp1
  xpos 179
  ypos 2074
 }
 ShuffleCopy {
  inputs 2
  name ShuffleCopy1
  selected true
  xpos 179
  ypos 2186
  disable {{parent.output_lightmask x1 1}}
 }
 Output {
  name Output1
  xpos 179
  ypos 2625
 }
push $N7cd1970
push $N7e10da0
 Dot {
  name Dot8
  xpos 327
  ypos 601
 }
 ChannelMerge {
  inputs 2
  operation multiply
  name ChannelMerge3
  xpos 293
  ypos 680
 }
 Premult {
  name Premult2
  xpos 293
  ypos 730
 }
 Crop {
  box {{Crop1.box} {Crop1.box} {Crop1.box} {Crop1.box}}
  softness {{Crop1.softness}}
  reformat true
  intersect {{Crop1.intersect}}
  crop {{Crop1.crop x1250 0}}
  name Crop1_clone1
  xpos 293
  ypos 756
  icon "\[value Crop1.icon]"
  bookmark {{Crop1.bookmark}}
 }
 Write {
  channels rgba
  file "\[value parent.root_path]/\[value parent.lightname].exr"
  colorspace linear
  raw true
  file_type exr
  datatype "32 bit float"
  version 4
  name Write1
  label "\[value write_modules] \[value wm_layer]"
  xpos 293
  ypos 782
  addUserKnob {20 Modules}
  addUserKnob {4 write_modules l module M {" " Comp_footage Comp_render Weekly "Weekly Resolution"}}
  addUserKnob {1 wm_layer l layer}
  addUserKnob {22 trixter_update_me +INVISIBLE T "try:\n    import tx_nuke.write_modules as wm\n    wm.update_node(nuke.thisNode())\nexcept: pass" +STARTLINE}
 }
end_group